Configuration Worksheet
Configuration worksheet
Use this worksheet to collect and record information to start setting up your storage system using the following:
- Online Support
- Connection Utility
- Unisphere Initial Configuration Wizard
This worksheet should be used in conjunction with the information in the previous chapter. Refer to the Connection Utility and Unisphere Online Help for additional guidance for setting up your storage system. In the respective user interface, click the ? icon to display its online help.
|
Note:
Sites with restricted Internet access must obtain the Connection Utility software and product license keys in advance to configure the system. Go to the Unity Info Hub at
http://bit.ly/unityinfohub for detailed instructions.
|
Online Support
Enter the following information related to your Online Support account:
Item
|
Value
|
---|---|
Online Support account:
|
|
Connection Utility
Enter the following information related to the system management address:
Item
|
Value
|
---|---|
Storage system Product ID / Serial Number:
|
|
Name:
|
|
Management IP Address:
|
|
Subnet Mask (IPv4 only):
|
|
Gateway:
|
|
Prefix Length (IPv6 only):
|
|
Unisphere
Enter the following information to initially log into Unisphere:
Item
|
Value
|
---|---|
Unisphere login information:
|
|
Initial Configuration Wizard
The Initial Configuration Wizard walks you through the initial set up of Unisphere and prepares the system for use. The first time the wizard launches, you will need to access the End User License Agreement (EULA) and install Unisphere licenses. Use the following list of screens and related actions as a guide to the initial configuration process.
Screen Name
|
Action
|
||
---|---|---|---|
Copyright
|
Accept the EULA.
|
||
Unisphere Password
|
Set the Unisphere admin and service passwords
|
||
Unisphere Licenses
|
Obtain your Unisphere license file online and upload your license file.
|
||
DNS servers
|
(Manual configuration) Enter the network name or IP address of one or more DNS servers.
|
||
NTP Servers
|
Enter the network name or IP address of one or more NTP (Network Time Protocol) servers.
|
||
FAST Cache and Storage Pools
|
Create FAST Cache (if supported) and storage pools, or configure these items later.
|
||
Alert Settings
|
Configure alert notifications by entering the email addresses to which alerts should be sent, set the severity level for these alerts, and configure an SMTP server.
|
||
Proxy Server
|
(optional) Enter the Protocol, IP address, and Proxy Server username and password.
|
||
EMC Support Credentials
|
Enter your EMC Online Support username and password.
|
||
Customer Information
|
Enter your customer contact information, including name, email, and office phone number. EMC Support will use this information to get in contact with you in response to an issue.
|
||
EMC Secure Remote Services
|
Enable and configure EMC Secure Remote Services (ESRS) to send system information to EMC and expedite issue resolution.
|
||
iSCSI Interfaces
|
(optional) Refer to the Unisphere Online Help for more information about configuring iSCSI interfaces.
|
||
NAS Servers
|
(optional) Refer to the NAS Server Wizard Online Help for more information about configuring NAS servers.
|
|
Note:
Visit the Unity Info Hub page at
http://bit.ly/unityinfohub for more information about configuring your storage system.
|